Determination of the parameters for the global RM scenarios 2020 - 2100 Start macro Goal Seek: Determination of the free parameter of scenarios 1 - 6, so that the budget is adhered to.
target is not met
input values determination via "goal seek" target value of "goal seek" target is met
 
RM scenarios: RM-1 const RM-2 exp RM-3 lin RM-4 quadr RM-5 rad RM-6 abs
characteristics of the scenario   RRt const RRt exp RRt lin RRt quadr RRt rad RAt const info
A corona effect should not be considered here.   only a negative RR_20 possible a positive RR_20 is also possible
(= increasing emissions after 2019)		   average 2017 - 2019 change rate 2019 global budget
   
copy to RM 2 - 5
change rate 2020 (RR20)[1]   -0.50% -0.50% -0.50% -0.50%   1.3% 0.0% 650 -0.50%
initial value (please enter in the grey cells if an error has occurred)[2] -6% 10% -1% 0 0 -4
RRt constant a a a a RA
Free parameters are determined by 'Goal Seek' in such a way as that the budget is adhered to. -5.30% 17.67% -0.40867% -8.2447E+303 -8.2447E+303 -8.245E+303
  -3.77787E+16   -0.00028209 -0.01531665 -1.0[3]
           
scenario ∑ 2020 - 2100 Gt 631 631 631 631 631 631
budget ∑ 2020 - 2100[4] Gt 631 631 631 631 631 631
   
emissions 2100 scenario Gt -0.73 -0.73 -0.73 -0.73 -0.73 -0.73
minimum emissions 2100; Emin[5] Gt -0.73 -0.73 -0.73 -0.73 -0.73 -0.73
values from the scenarios   RM-1 const RM-2 exp RM-3 lin RM-4 quadr RM-5 rad RM-6 abs
year  Emin is achieved   2100 2050 2067 2056 2078 2058
year emissions neutrality[6]   2092 2050 2064 2054 2073 2057
At which level of emissions (threshold value; TV) shall the annual percentage reduction be change into a constant annual reduction?[7] RM 2 - 5 1.3  Gt 3.50%[8] of emissions in 2019
RM-1 1.9  Gt 5.10%[9]
dashboard check sum 0 is ok; 1 not ok
RM-1 const RM-2 exp RM-3 lin RM-4 quadr RM-5 rad RM-6 abs
budget is adhered to 0 0 0 0 0 0 0
emissions in 2100 not positive 0 0 0 0 0 0 0
no increasing emissions 0 0         0
check sum 0 0 0 0 0 0 0
E_2100 is negative but not equal to E_min 0 0 0 0 0 0  
[1]

Relative reduction or increase in emissions in 2020 compared to of 2019.

Due to the temporary corona effect, a normalised value for 2020 must be specified here.
[2]
RM:
If the target value search (Goal Seek) generates an error message, please enter this initial values in the gray cells and choose a different starting value for 2020 or TV before you start the macro 'Goal Seek' again.
[3]
RM:
Gt p.a.
[4]
input value sheet "base data"
[5]
input value sheet "base data"
[6]
RM:
first year negative emissions or emissions equal to zero
[7]
In order to be able to map net negative emissions, it is necessary to change the method at a specified threshold.
[8]
AW:
Plausible initial value: 3,5%
[9]
AW:
Plausible initial value: 4,5%